Stock Car Racing Homepage

P87539 Image Large

Prev Next
The pump valve must be welded into the end of a 1/2-inch male fitting on a hydraulic hose. Insert the valve no more than 1/4 inch into the fitting. When the jack is finished, twisting the hose will activate the valve.
Floor & Car Jack - Modification - Low Cost Lift

 The pump valve must be welded into the end of a 1/2-inch male fitting on a hydraulic hose. Insert the valve no more than 1/4 inch into the fitting. When the jack is finished, twisting the hose will activate the valve.  View Related Article

 

 

Car Research Guide