Getting Belted: How to properly install safety belts in a racecar
Step 1:Insert the strap through the tightening buckle. Step 2:Pull the strap 8 to 10 inches beyond the buckle, fold the edges, andinsert it in mounting bracket. Step 3:Fold the strap back and reinsert it through the buckle as shown. Step 4:Fold the strap back again and insert it through the bottom portion ofthe buckle. Locking the three-bar slide adjuster (buckle) shown in steps 1 through 4is very important. The three-bar slide adjuster must be located as closeas possible to the bolt in the mounting bracket. image by Crow Enterprizes
View Related Article
|
|