Stock Car Racing Homepage

P83291 Image Large

Prev Next
Front cage supports pass through hole in top of frame. A 11/4x3-inch hole must be cut in the side rail to allow the tube to be welded into the frame. A gusset should be added inside the frame rail for additional strength.
IMCA Stock Car: November 2000 - The Rollcage

 Front cage supports pass through hole in top of frame. A 11/4x3-inch hole must be cut in the side rail to allow the tube to be welded into the frame. A gusset should be added inside the frame rail for additional strength.  View Related Article

 

 

Car Research Guide