Stock Car Racing Homepage

P83348 Image Large

Prev Next
Vise grip both the upper and lower shock mounts in place. The mounting bolts should be 90 degrees to the shock. This alignment prevents binding and bending the shock shaft. One of the four Stock Car Products springs is visible here. Be sure to cover both the spring and the shock before welding.
December 2000 - Adding the Suspension

 Vise grip both the upper and lower shock mounts in place. The mounting bolts should be 90 degrees to the shock. This alignment prevents binding and bending the shock shaft. One of the four Stock Car Products springs is visible here. Be sure to cover both the spring and the shock before welding.  View Related Article

 

 

Car Research Guide