Stock Car Racing Homepage

P173151 Image Large

Prev  Next
 
P173151 Image Large
P173151 Image Large
We used 2-inch square tubing as frame support rails. They ran the length of the car, which required a bit of cutting. Wes alternated his welds above and below the tubing to keep heat from causing any warpage. View Related Article
P173150 Image Large P173151 Image Large P173152 Image Large P173153 Image Large P173154 Image Large P173155 Image Large P173156 Image Large
P173157 Image Large P173158 Image Large

 
Stock Car Racing