Fuel AccumulatorBarry Grant Inc. offers a fuel accumulator with a filter. This unit can eliminate the lean situations at the end of the straight by storing fuel under normal pressure for those momentary occasions when the fuel pump can't keep up. At those times, the accumulator will continue to supply fuel to the carburetor. Barry Grant Inc., Dept. SCR07, 1450 McDonald Rd., Dahlonega, GA 30533; 706/864-8544; www.barrygrant.com
Quick-Change RearendSpeedway Engineering produces this Mini Stock quick-change rearend. This mini version of Speedway's Super Max has aluminum four-lug hubs, gun-drilled axles, and 3-inch x .120-inch-wall chrome-moly axle tubes. Aluminum rotor adaptors are available to fit any brake package. Standard six-spline change gears (midget) are used. Speedway Engineering, Dept. SCR07, 13040 Bradley Ave., Sylmar, CA 91342; 818/362-5865; www.1speedway.com
Race BootsThese boots fit over and completely cover Heim-type rod ends. This protects the bearing from dirt and corrosion. The boots are available in the popular 31/44-inch size for suspension parts and other sizes will soon be offered. Suntech Design & Manufacturing Inc., Dept. SCR07, 17826 N. 43rd Pl., Phoenix, AZ 85032; 602/908-2022.
3-In-1 ChairDon't have a seat? Take your own and refresh yourself at the same time. This combination backpack/folding chair/cooler holds a six-pack of cans. It's just the thing for the race fan doing a little tailgating, or the team member needing to relax in the pits prior to a race. The 3-In-1 Chair weighs only 9 pounds. Kelsyus, Big Bang Products, Dept. SCR07, 720 S. Montford Ave., Baltimore, MD 21224; 410/534-6321; www.kelsyus.com
Oil Filter AdaptorCanton Racing Products makes this remote oil filter adaptor for the small-block Chevrolet engine. Complete with attaching hardware, this unit can be installed with no machining. It allows the filter to be moved to a more secure or accessible area. Canton Racing Products, 232 Branford Rd., N. Branford, CT 06471; 203/481-9460; www.cantonracingproducts.com
Lug-Nut RingsLapsaver lug nut rings keep five clean lug nuts ready for use. Lapsavers are for short-track racers where an occasional stop for a flat tire is required. With the wheel replaced, the whole Lapsaver can then be held to the wheel to locate all nuts for tightening. When lug nuts are spun off and dropped in the dirt, clean ones are ready with the Lapsaver. Clean lug nuts save studs. Hamernik Racing Enterprises, Dept. SCR07, 191 E. King St., Winona, MN 55987; 507/452-8801; www.lapsavers.com
Racing FuelVP Racing Fuels introduces VP 2BBL fuel. Specifically formulated for low-compression, circle track engines with steel heads, this formula can yield a 2 to 3 percent power increase over 110-octane race fuels. The fuel is not oxygenated, so it will pass fuel checks at the track, according to VP. VP Racing Fuels, Dept. SCR07, P.O. Box 47878, San Antonio, TX 78265; 210/635-7744; www.vpracingfuels.com