Stock Car Racing Homepage

Cut And Weld Plasma Cutter

Prev  Next
 
Cut And Weld Plasma Cutter
Cut And Weld Plasma Cutter
The plasma cutter ready to work. The torch is in the foreground. Behind it is the ground clamp. The machine has one center dial for its adjustments. The machine can also be switched from 220-volt to 110-volt current. At the rear, a red air hose is plugged in. Only 4.5 cfm at 60 psi is required to make a cut. View Related Article
Cut And Weld Tig Welder Cut And Weld Heat Control Cut And Weld Custom Aluminum Seat Cut And Weld Plasma Cutter Cut And Weld Steady Cut Cut And Weld Intricate Cut Cut And Weld Larger Offset

 
Stock Car Racing