Stock Car Racing Homepage

Cut And Weld Steady Cut

Prev  Next
 
Cut And Weld Steady Cut
Cut And Weld Steady Cut
The plasma cutter is in operation. Here the torch is held slightly off the work piece. The torch can touch the work piece with no ill effects. Use a guide whenever possible for a steady cut. When properly adjusted for the metal used, the plasma cutter leaves little slag on the back of the cut. View Related Article
Cut And Weld Tig Welder Cut And Weld Heat Control Cut And Weld Custom Aluminum Seat Cut And Weld Plasma Cutter Cut And Weld Steady Cut Cut And Weld Intricate Cut Cut And Weld Larger Offset

 
Stock Car Racing